Homeowner’s Guide to Cabinet Hinges

Partial or semi wraparound hinge.
Partial or semi wraparound cabinet door hinge.

Partial or Semi Wraparound Hinges

As the name implies, partial wraparound hinges wrap around the frame of the cabinet and attach to the back of the door. Because they cover such a large surface area, they’re very stable. When the cabinet door is closed, all you see is the knuckle and pin. Partial wraparound hinges are available for any type of face frame cabinet door and are usually self-closing.

Uses: Face frame cabinets with overlay, inset, or flush doors.

9 COMMENTS

    • Hi Marsha,
      Sorry about that! Our print friendly feature is a plug-in that we have little control over that doesn’t work right on multipage articles. We hope to have a fix for the problem in the future. In the meantime you can go to each page and copy and paste it into a Word document.

  1. Really like this website; it has been very helpful.

    Is there a tool that can bore the hole need for the installation of the European hinge? If so, can you recommend a good one?

  2. When using 3/8 inch surface mounted self closing hinges and mounting them to the cabinet frame, do I need to kick the spring out just a tad to make it sit flat ? If that makes sence?
    Thank you !

  3. I installed the partial semi wrap around hinge on my doors but it does not close all the way. Need help with installation. My doors used to have zek wrap around so these were similar since the ones I had are obsolete. Thanks

  4. I have 1/2 semi-wrap overlay cab. door hings. I refinished the doors and reinstalled the hings.now some of the doors they will not close all the way. I cannot figure how to correct them. HELP

  5. We repainted our bathroom vanity and changed the color of hinges to chrome or satin hinges. The doors were also repainted. When we purchased the new hinges we made sure the holes all lined up. Now we cannot get the doors to close as before because the they appear too wide. We think there is a hinge problem. Any suggestions to help us?

    • Hi, James,
      Here’s “Today’s Homeowner” host Danny Lipford’s answer to your question:
      “You may have to remove the screws on this cabinet style. Fill those holes with putty and then reinstall the doors to allow proper clearance. Touch-up painting may be required.”
      Thanks for your question.

LEAVE A REPLY

Please enter your comment!
Please enter your name here