Garages make for great storage space, but they can quickly become cluttered.
Russ and Raelyn Watkins have a spacious two-car garage, but the space has filled up over time. Walking from their car to the door has become an obstacle.
The garage is the most-used entrance in their home, so making sure the pathway is clear for the family and visitors is a top priority.
Build Storage Shelf for Plastic Totes
The space between the two garage doors is perfect for a shelf to hold some plastic storage totes.
We start designing the shelf to custom fit the space, which is about two feet wide between the doors. We measure out the shelves to fit the height of the storage totes. The shelf is long enough to fit five storage totes long and two stacks high. This two-tote height is perfect for adding a counter on top to provide a surface for extra workspace.
To build this storage shelf, it’s essentially just building a frame to fit the totes and then putting the plywood on top of it. We measure the legs to space it up properly, so the totes can easily be taken in and out.
After it’s assembled, we give it a nice coat of paint with a paint sprayer.
Build Shelf Above Fridge
Next, we add some storage space up high with a wall shelf. We mark on the wall how high we need our shelf to be so we can accommodate some storage space on top of the fridge.
Next, we mark our studs for attaching the shelf. Almost every wall on a home has 16-inch centers — so the 2-by-4 studs are spaced 16 inches apart.
We find the first stud and use this formula as a guide to mark the rest of the studs. This speeds up the process because we don’t have to use a stud finder to find each one.
Instead of using metal shelf brackets to install our shelf, we take a 1×12 and cut it at a 45-degree where the grain is vertical to make a triangle corbel. We use Titebond Original Wood Glue to keep the corbel and cleat in place.
To give the shelf and corbels extra support, we add a 1×4 cleat. We leave some space at the top of the corbels so the cleat will slide under the trim beneath the shelf.
After the shelf is assembled, we paint it to match the plastic storage tote shelf. Then, we apply some Titebond Heavy Duty Construction Adhesive to the back of the shelf before we nail it to the wall.
Utilize Wall Space
The hooks on the walls came with the house when the Watkins family bought it. They don’t work with their family’s storage needs, so we create a new system that’s perfectly tailored for them.
Our solution for storing the Watkins’ tailgating chairs is hanging them on the wall with J-hooks. These hooks are actually meant for hanging pipes, and you can find them on the plumbing aisle.
To get more chairs on the wall and also add some visual variety, we staggered them on the wall.
We also:
- Painted the walls
- Changed the opening direction of the door
- Moved the refrigerator
- Restored garage floor
- Removed blinds and installed window film
Post-Production Thoughts
Russ and Raelyn’s garage was like many people’s — a place where things got dropped when there was nowhere else for them. Without adequate shelving, the floor filled up fast, and walking through the garage was a little like an obstacle course. And, the dingy walls and cobweb-covered windows didn’t make the chore any easier.
Now, the garage is light and bright thanks to the great new color on the walls and the crisp, clean window film on the windows.
The freestanding shelf between the doors holds tons of smaller items, thanks to the transparent storage bins, while the long shelf on the wall is ready to handle lots of long-term storage.
The camping chairs now have their own designated spot, off the floor so there’s no more obstacle course.
In fact, the new arrangement freed up so much space that Raelyn can park closer to the door to the house and still leave room for the mower.
Other Tips From This Episode
 | Simple Solutions Creating a Stop Block For Longer Wood Cuts |
 | Best New Products Ryobi Link Modular Storage: Customized Just For You! |
 | How To Frosted Window Film: Why You Need It and How to Install |
Products Featured in This Episode
- 1×2 for shelf cleat: Trim Board Primed Finger-Joint (Common: 1 in. x 2 in. x 8 ft.)
- 1×4 for corbel cleats and hanging hooks: Trim Board Primed Finger-Joint (Common: 1 in. x 4 in. x 12 ft.)
- 1×12 shelf board: 1 in. x 12 in. x 8 ft. Primed Pine Finger-Joint Board
- 2×4’s:2 in. x 4 in. x 8 ft. #2 Southern Yellow Pine Stud
- Danny’s favorite tape measure: Stanley 25 ft. PowerLock Tape Measure
- J-hooks: Oatey 4 in. DWV J-Hook Pipe Hanger
- Ladder hook: Everbilt Heavy-Duty Wall Mounted Steel Utility Hook
- Large totes: Sterilite 64 Qt. Latching Storage Box
- Our new favorite drill: DeWalt ATOMIC 20-Volt MAX Cordless Brushless Compact 1/2 in. Drill/Driver
- Hooks on the back wall under long shelf: Everbilt Steel Assorted Wall Mount Hooks
- Magnetic stud finder: The StudBuddy Magnetic Stud Finder
- Paint sprayer: HomeRight Super Finish Max Fine Finish HVLP Sprayer
- Plywood for large shelf unit: 12 mm – Sande Plywood (1/2 in. Category x 4 ft. x 8 ft.)
- Screws: Deckmate 3 in. Tan Exterior Self-Starting Star Flat-Head Wood Deck Screws #9
- Shelf paint: Benjamin Moore’s Old Navy color-matched in Behr Satin Enamel
- Small totes: Sterilite 30 Qt. Latch Storage Box
- Wall color: Valspar Filtered Shade in Glidden Premium paint
- Window film: (we used one per window): Gila 4 ft. x 6.5 ft. Frosted Privacy Window Film
- Window film application spray: Gila 16 fl. oz. Window Film Application Solution
This page contains affiliate links. If you purchase a product from these links, we will earn a small commission at no additional cost to you.
love your show. Wish it was on for an hour instead of half hour.
Hi Cheri. If you want more of Today’s Homeowner TV, we have more than 100 hours of episodes available to stream right now >> https://todayshomeowner.com/stream/