Sponsored message from
QUIKRETE® FastSet Anchoring Epoxy
QUIKRETE® FastSet Anchoring Epoxy is a two component, 100% solids epoxy designed for the horizontal or vertical rapid anchoring of railings, bolts and threaded rods into concrete or masonry. The epoxy comes in a single cartridge that can be loaded into a standard caulk gun.
The non-sag epoxy formula is solvent-free and will achieve a pull out strength of over 29,000 lbs.
To apply, screw a static mixer nozzle onto the cartridge and place the cartridge into a caulk gun. The epoxy should be dispensed from the bottom of a hole, filling approximately half of its depth.
A threaded rod or rebar should then be inserted to the bottom of the hole and turned clockwise. The epoxy sets in 4-5 minutes, which makes it ideal for horizontal and vertical applications. The epoxy can support heavy loads after curing for two hours.
QUIKRETE® High Strength Anchoring Epoxy
QUIKRETE® High Strength Anchoring Epoxy is a high strength, two-component epoxy perfect for heavy duty application on horizontal surfaces. The 100% solids epoxy comes in a single cartridge that can be loaded into a standard caulk gun.
Its non-sag, solvent-free and low odor formula offers users 15 minutes of working time and is ideal for multiple heavy duty anchoring projects, achieving a pullout strength of over 30,000 psi. QUIKRETE® High Strength Anchoring Epoxy can be used to anchor railings, bolts and threaded rods into concrete and masonry.
To apply, screw a static mixer nozzle onto the cartridge and place the cartridge into a caulk gun. The epoxy should be dispensed from the bottom of the hole, filling approximately half of its depth. A threaded rod or rebar should then be inserted to the bottom of the hole and turned clockwise. The epoxy can support heavy loads after curing for two hours.
For more information visit quikrete.com.
