Entry doors take a lot of abuse from the elements. If yours is looking a bit shabby, perhaps it’s time to dress it up by refinishing and replacing the hardware. By following these simple steps, you can turn an eyesore into the envy of the neighborhood

Steps in refinishing an entry door:

  • Use a hammer and nail to remove the hinge pins.
  • Take the door off its hinges. Entry doors can be heavy, so have someone on hand to help you carry it.
  • Lay the door on padded sawhorses in the garage with the outer side facing up.
  • Remove the old hardware and sand the finish or paint down using 80 grit sandpaper followed by finer grits.
  • Stain the door followed by two coats of exterior polyurethane. Or, if you prefer, prime and paint it.
  • Install a new brass kick plate and doorknocker while the door is still on the sawhorses.
  • Rehang the door and install a new lockset and deadbolt.

Watch the video above to find out more.


Further Information

 
Editorial Contributors
avatar for Danny Lipford

Danny Lipford

Founder

Danny Lipford is a home improvement expert and television personality who started his remodeling business, Lipford Construction, at the age of 21 in Mobile, Alabama. He gained national recognition as the host of the nationally syndicated television show, Today's Homeowner with Danny Lipford, which started as a small cable show in Mobile. Danny's expertise in home improvement has also led him to be a contributor to popular magazines and websites and the go-to source for advice on everything related to the home. He has made over 200 national television appearances and served as the home improvement expert for CBS's The Early Show and The Weather Channel for over a decade. Danny is also the founder of 3 Echoes Content Studio, TodaysHomeowner.com, and Checking In With Chelsea, a décor and lifestyle blog.

Learn More