The DeWALT 4-in-1 Heavy Duty Staple and Brad Tacker (model# DWHTTR410) is great for driving standard and round crown staples up to 9/16” long as well as 18-gauge brads up to 5/8” long.
- Lightweight aluminum housing.
- Wire guide to center cable and wire on staple.
- Uses DeWALT, Stanley, and Arrow brand staples.
- High and low power switch to control staple and brad penetration.
- Belt clip is adjustable for both left-hand and right-hand use.
The DeWALT 4-in-1 Heavy Duty Staple and Brad Tacker is available at The Home Depot. Watch this video to find out more.
- DeWALT 5-in-1 Hacksaw (video)
- DeWALT Cordless Impact Driver (video)
Jodi Marks: Now, if you’re working on a project where you need light and heavy duty staples while you’re doing it, and then you also might need to attach some cable staples. And then of course you might have some brads in there that you might be needing to drive in.
Chances are you probably have to go and get a different kind of tacker or staple gun to do all of those applications. But take a look at this. This is the DeWALT 4-in-1 multi tacker. So, whether you’re going to be using light duty, heavy duty, also brad, or even your cable staples, this could do it all with just this one tool.
Now, you don’t necessarily have to get just DeWALT because you could also use Stanley, DeWALT, or Arrow staples if you happen to have those on hand. So you can do that.
Also, take a little look at this switch right here. If you have it on low, that’s the perfect setting for low power when you’re attaching cable wire. But if you’ve got to drive a brad, you can pop it up there into high power.
So if you’re in the market to upgrade your stapler or you’re in the market for a new one, this is a pretty good option.