There are lots of details that have to be addressed when tackling a major renovation like the Kuppersmith Project house. Here’s how we tackled everything from latticework to lawn irrigation.
Stove Vent Hood
In the kitchen, a glass tile backsplash was applied to the wall behind the stove. Once the tile was in place, the contemporary styled Broan range hood was installed over the stove.
After the heart pine floors had been stained, several coats of sealer were applied to protect the surface and give the floors a beautiful finished look.
To allow the homeowners privacy on the breezeway leading from the house to the garage, wood latticework was installed on the side facing the street. Rather than using prefabricated lattice panels, we custom made our own latticework from strips of cypress lumber.
While making custom lattice was more labor intensive, it eliminated the seams in prefab panels, and allowed the lattice door to blend perfectly with the latticework around it.
The horizontal strips of lattice went up first, with a scrap of lattice used as a spacer between each strip. Vertical strips were then nailed to the horizontal lattice, to tie everything together.
Lawn Irrigation System
A gas powered trencher was used to dig the trenches for the irrigation system in the yard. Plastic PVC pipe was used for the water lines in the irrigation system, with each sprinkler head attached to the supply line by a flexible pipe.
The water lines for each irrigation zone in the yard were attached to a central manifold. The valve for each zone is controlled by a low voltage electrical signal from a control panel mounted on the house.
Before digging in your yard, always call the utility company to check for any buried pipes or lines in your yard.
Brick Wing Wall
To blend the 1926 house in with the master bedroom addition, a brick wing wall was built that matched one on the existing house.
A cast stone accent cap for the wall was constructed using a form which was filled with concrete. The cap was then secured to the wing wall with construction adhesive.
Crawlspace Access Door
To provide access to the crawlspace under the house, a steel frame with hinged door was made to size, then screwed to the opening in the foundation wall.
To protect the steel from rust, the door and frame were primed using Rust-Oleum Universal All-Surface Primer, followed by several coats of Universal All-Surface Paint to matched the trim and cast iron foundation vents.
The crawlspace door also provides access to collection containers for the recycling chutes which were built into the kitchen cabinets using PVC drain pipe.
To take advantage of the storage space in the two car garage, a GearTrack® wall mounting system from Gladiator GarageWorks was installed.
The double channel tracks are mounted on the wall to allow easy installation and adjustment of hanging cabinets and specialized storage components.
Watch Videos from This Episode
- Constructing Lattice for the Breezeway
- Installing the Lawn Irrigation System
- Making a Poured Concrete Cap for a Wing Wall
- Foundation Door and Recycling Chute
- Garage Workshop and Storage at the Kuppersmith Project House
- Installing Tile Backsplash and Range Hood in Kuppersmith Project
- Garage Storage Solutions
- Installing Landscape Lighting
Other Tips from This Episode
Simple Solutions with Joe Truini:
DIY Miter Saw Work Table
To work effectively, a power miter saw needs a good sturdy work table. A portable work table can be constructed using an extension ladder, two sawhorses, plywood saw base, and two blocks to support the stock. (Watch This Video)
Best New Products with Jodi Marks:
Water Storing Crystals
Hanging outdoor plants are a beautiful addition to your porch, but since the plants are suspended, the soil can dry out quickly. Scotts Miracle-Gro Water Storing Crystals expand to absorb and store many times their weight in water to keep plants from drying out quickly. Water Storing Crystals are available at The Home Depot.
Thinking Green with Danny Lipford:
Harnessing the Wind
Until recently, using wind turbines to produce electricity for your home wasn’t practical for 80% of U.S. residential areas, since they don’t receive consistent winds of 8 m.p.h. or more. However, new wind turbines are available that work even in very low winds.