The transformation requires the completion of several simple projects:
Painting the Walls
Alani is no stranger to a paint roller but she does need a little help with prep work. Things like cleaning the edges of drywall holes and applying multiple coats of spackle before sanding make a big difference in the quality of a finished paint job.
Framing the Mirror
Like many bathrooms, this one featured a large, frameless mirror over the vanity. Adding a frame around such an existing mirror is an easy way to add an elegant look to any bathroom. In this case, we made it from cut-down baseboards and extended it up to the ceiling by adding plywood above the mirror to surround the light fixture which we also updated as part of this project.
Building a Window Seat
Part of this bathroom is built into one of the home’s dormers so it’s an ideal spot to add a window seat. In this case it makes an ideal spot to hide the dirty laundry hamper and the bathroom’s cleaning supplies. The design is simple, relying on a two-by-two framework attached directly to the walls and covered with cabinet grade plywood. The seat is hinged at the back to allow access to the hamper and cleaning supplies.
Glazing the Woodwork
The vanity cabinet was in good shape, but a little bland for Alani’s taste. So our solution was to apply a glaze to it, the new mirror frame and the window seat. A glaze is simply a paint or stain. What gives it its unique look is the technique of applying the glaze and then wiping it off with either a rag or a dry brush. In this case we use a rag to remove the warm tinted glaze from white cabinets.
Replacing Cabinet Hardware
The polished brass cabinet hardware was one of the first cues to this room’s age so we updated all of it with new hardware in oil rubbed bronze.
Replacing Plumbing Fixtures
The plumbing fixtures were also out-of-date. To coordinate with the cabinet hardware and the newly glazed cabinetry Alani chose fixtures from Moen’s Ashville line in Mediterranean Bronze.
Other Tips from This Episode:
Simple Solutions with Joe Truini:
Tip for Cutting Crown Molding
In order to properly make miter cuts in crown molding you have to turn it upside down on the miter saw table. Holding the molding in exactly the right position while you make a cut is the difficult part. Watch the solution here.
Best New Products with Jodi Marks:
Bosch Multi-Purpose Carbide Drill Bits
These bits work equally well in wood, metal and masonry materials so you don’t need multiple bits of the same size. Their sturdy bit heads will have a long life whether you’re using an ordinary drill, an impact driver or a hammer drill. They’re available at The Home Depot. Watch video here.