10 Best HVAC Companies in Irving, TX

Signs You May Need HVAC Repair or Replacement

If your home's HVAC system isn't working correctly or suffering from a lot of wear and tear, you may need to hire an HVAC contractor for repairs or replacement. Watch for these common indicators that your system requires expert attention:

• Cracking, rust, or corrosion
• Frequent breakdowns and need for repairs
• Refrigerant leaks
• Temperature control issues or thermostat malfunctions
• Uneven heating/cooling or poor air circulation
• Odd noises when the system turns on
• Higher than normal energy bills
• An HVAC system that's over 15 years old

These HVAC red flags indicate that you should have your system evaluated. A local provider can complete an inspection, identify problems, and recommend repairing or replacing your HVAC unit.

Cost of HVAC Installation and Maintenance in Irving

The price of HVAC installation or maintenance varies depending on the type of unit you have. Common kinds of HVAC units include the following:

• Split or mini-split: If your home's ductwork isn’t suited for a central HVAC system, you likely have a split or mini-split system. Split systems have interior units in each room to control temperature; these indoor units all connect to an outdoor unit.
• Hybrid split: A hybrid split HVAC system works almost the same as a standard split system. It has the benefit of having the capability to use either gas or electricity for power.
• Heat pump: Heat pumps transfer hot and cold air between your home and the outside. These systems don't make their own heat or AC, so they work more efficiently in moderate climates and may not be as effective during Irving's hot summers.
• Packaged heating and air: Packaged HVAC systems are a good choice for smaller houses. These systems have a single combined AC and heating, typically located in a basement or attic. They're compact, energy-efficient, and easy to maintain.

The price of HVAC maintenance also varies depending on what kind of work being done. HVAC systems are complicated and can require different kinds of maintenance. The prices of some common jobs are as follows:

Ways to Save Money on HVAC Costs

Essential HVAC maintenance is important, but can be pricey. Luckily, there are steps homeowners can take to reduce wear and tear on their HVAC and lower future maintenance needs.

• Monitor for potential problems. Keeping an eye out for problems, for instance by consistently checking your thermostat and energy bills, helps you resolve them before they get out of hand.
• Keep your system clean. Cleaning your condenser fan blades, ductwork, grills, and indoor evaporator coil regularly helps keep your HVAC system working efficiently and reduces the risk of mold growth. The National Air Duct Cleaners Association recommends cleaning your HVAC system once it starts to look dirty.
• Change the position of your blinds seasonally. Leaving your blinds open during the colder months helps warm your home with passive solar heating. Closing the blinds in warmer seasons helps prevent the heat from getting inside. Doing both helps decrease the demand on your HVAC.
• Change filters regularly. Air flows most effectively through your HVAC system when you replace or clean the filters every 1–3 months. Also try not to let debris pile up on the outside areas of your HVAC.

How To Choose a Local HVAC Company

It's important to know what makes a good HVAC company. A properly licensed contractor with the right experience will give you confidence that they can maintain your HVAC system properly, providing you with effective air conditioning and heating in your home.

Compare Multiple Bids

Contact at least three HVAC providers for quotes. Explain your issues and schedule an in-person inspection if possible. Compare companies' diagnoses, suggested repairs, estimated costs, timeframes, and warranties. Avoid providers that pressure you or demand upfront payment.

Check Credentials

It's important to choose an HVAC company that employs technicians with the appropriate qualifications and expertise. In all states, HVAC contractors have federal requirements from the Environmental Protection Agency (EPA). To obtain the EPA Section 608 Technician Certification, individuals must pass an exam (the type of exam depends on what kind of equipment they plan to work with). Section 608 certification is required for all technicians who "maintain, service, repair or dispose of equipment that could release refrigerants into the atmosphere." All other licensing requirements are handled by the state.

In Texas, HVAC contractors are required to be licensed by the Texas Department of Licensing and Regulation. Contractors must have at least four years of experience within the past six years and must show proof of insurance. An individual can also be a registered technician, which has no experience requirements, or a certified technician, which requires two years of experience. Both registered and certified technicians must be supervised by a licensed contractor. Reviewing feedback on the Better Business Bureau (BBB), Yelp, Google Reviews, and similar sites can assist your decision as well. Choose a provider with great reviews and stories of positive customer experiences.

Understand Work Details

Always make sure you understand what a company’s process is like. When getting HVAC repairs, ask your provider to explain which parts require replacement and why. Confirm that your technician will clean and test your system at the end of the job to verify proper operation. When replacing your HVAC system, ask your contractor to provide details on the new energy efficiency, brand, estimated installation time, features, and model. Before work begins, make sure you understand the process your provider will use to select the correctly sized system for your home and what the cost will be.

Compare Warranties

Reliable HVAC companies offer warranties on repairs and installations. The more complete the coverage, the better. Compare warranty details between companies and pick the one that offers the best protection for the fairest price.

Get Quote in Writing

Get written quotes before beginning any HVAC work. The quote should outline costs for both materials and labor. Review all terms carefully before signing.