10 Best HVAC
in Conyers, GA

Signs You May Need HVAC Repair or Replacement

If your HVAC system is broken or getting old, it likely needs servicing or replacement from an HVAC company. Look for these signs your system needs service:

• Odd noises when the system turns on
• Poor air circulation or uneven heating/cooling
• Frequent breakdowns and need for repairs
• Higher than normal energy bills
• Corrosion, rust, or cracking
• Refrigerant leaks
• Temperature control issues or thermostat malfunctions
• An HVAC system that's over 15 years old

If you're experiencing any of these HVAC issues, we recommend having a technician inspect your system. A local professional can diagnose problems and let you know whether whether repairing or getting a new HVAC unit is the correct solution.

Cost of HVAC Installation and Maintenance in Conyers

What you pay for HVAC installation or maintenance is determined by your system type. Common HVAC unit styles include the following:

• Split or mini-split: If your home's ductwork isn’t suited for a central HVAC system, you probably have a split or mini-split system. Split systems have indoor units in each room to control temperature. These indoor units all connect to an outdoor unit.
• Hybrid split: A hybrid split HVAC system functions in the same way as a normal split system, but has the benefit of being able to utilize energy from either electric or gas sources.
• Heat pump: Heat pumps transfer hot and cold air between your home and the outside. These systems don't produce their own heat or AC, so they work better in moderate climates and may not be as effective during Conyers' hot summers.
• Packaged heating and air: Packaged HVAC systems work best in smaller homes. They consist of a single combined air conditioner and heating unit, commonly located in an attic or basement. This unit is typically small, energy-efficient, and straightforward to maintain.

HVAC maintenance costs vary based on the specific services required. HVAC systems can be complex and potentially require a number of services. Costs for typical jobs are as follows:

Ways to Save Money on HVAC Costs

Essential HVAC maintenance is important, but can be pricey. Thankfully, homeowners can take steps to reduce wear and tear on their HVAC and lower future maintenance needs.

• Change the position of your blinds seasonally. During winter, leaving your blinds open allows your home to benefit from passive solar heating. In the summer, keeping your blinds shut helps to block out heat. Doing both reduces the amount of work your HVAC system is required to do.
• Keep your system clean. Cleaning your ductwork, indoor evaporator coil, grills, and condenser fan blades regularly helps keep your HVAC system working efficiently and lowers the risk of mold growth. The National Air Duct Cleaners Association recommends cleaning your HVAC system when it begins to look dirty.
• Change filters regularly. Air flows through your HVAC system most effectively when you change out or clean the filters every 30–90 days. Also avoid letting debris pile up on the outdoor parts of your HVAC.
• Monitor for potential problems. Keeping a close eye on the efficiency of your HVAC system — for instance by checking your thermostat settings and energy bills — helps you identify and fix problems before they get out of hand.

How To Choose a Local HVAC Company

Finding the right HVAC company is crucial for a successful installation or repair. An experienced, credentialed HVAC contractor gives you confidence your system can provide consistent heating and air conditioning year-round.

Compare Multiple Bids

Get quotes from three or more HVAC contractors. Describe your issues and ask if technicians can inspect your system in person. Compare each contractor's diagnoses, recommended solutions, estimated cost, warranties, and timeline. Avoid providers that pressure you or demand payment before work.

Check Credentials

Choose an HVAC company with highly trained technicians who have appropriate licensing and experience. In all states, HVAC contractors have federal requirements from the Environmental Protection Agency (EPA). To obtain the EPA Section 608 Technician Certification, a contractor must pass an exam (the type of exam depends on what kind of equipment they intend to work with). Section 608 certification is required for all technicians who "maintain, service, repair or dispose of equipment that could release refrigerants into the atmosphere." All other licensing requirements are handled on a state-by-state basis.

In Georgia, all HVAC contractors must be licensed. They can have either a Class I or Class II license. A Class I license requires four years of experience and limits the type of equipment a contractor can work on. A Class II license requires five years of experience and is unrestricted. Licenses can be verified on the Secretary of State's website. Also look at a company's reviews and complaints on sites such as the Better Business Bureau (BBB), Google Reviews, and Yelp. Pick a company with positive feedback and good customer testimonials.

Understand Work Details

Always make sure you know what a company’s process looks like. When HVAC repairs are needed, ask your provider to list which parts require replacement and explain why. Confirm that your technician will clean and test the system after finishing the work to verify proper operation. When replacing your HVAC, ask the provider to explain the new energy efficiency, model, estimated installation time, brand, and features. Before work starts, make sure you understand the process your provider will use to size the new HVAC system appropriately for your home and what the price will be.

Compare Warranties

A reputable HVAC company will stand behind its repair work and equipment installations with a warranty. The longer and more comprehensive the warranty coverage, the better. Carefully review the fine print for each contractor and choose the company that provides the best protection within your budget.

Get Quote in Writing

Always get estimates for HVAC service in writing before committing to a provider. An itemized quote should cover both materials and labor. Make sure you review all terms before signing a contract.