10 Best HVAC Companies in Avondale, AZ

Signs You May Need HVAC Repair or Replacement

If your HVAC system is having issues or getting old, it likely needs servicing or replacement from an HVAC company. Look for these signs your system needs service:

• Frequent breakdowns and need for repairs
• Cracking, rust, or corrosion
• Higher than normal energy bills
• Temperature control issues or thermostat malfunctions
• Strange noises when turning on
• Refrigerant leaks
• Poor air circulation or uneven heating/cooling
• An HVAC system that's over 15 years old

If you notice any of the above, it's wise to have a local HVAC technician inspect your system. They can pinpoint problems and let you know whether repair or full HVAC replacement is required.

Cost of HVAC Installation and Maintenance in Avondale

Your HVAC installation or maintenance cost varies depending on the type of unit. Common HVAC unit types include the following:

• Split or mini-split: If your home doesn't have the right ductwork for central air or heating, you probably have a split HVAC system. Split or mini-split systems consist of internal units that control the temperature in individual rooms, and that are all connected to an outdoor unit.
• Hybrid split: A hybrid split HVAC system functions in the same way as a normal split system, but has the advantage of being able to draw power from either gas or electric sources.
• Heat pump: Heat pumps transfer warm and cool air between your home and the outdoors. They don't generate their own heating and cooling, so they work best in more moderate climates and may not be as effective during Avondale's hot summers.
• Packaged heating and air: Packaged HVAC systems are a smart choice for smaller homes. These systems have a single heating and cooling unit, normally located in a basement or attic. They're space-saving, cost-effective, and easy to maintain.

HVAC maintenance prices vary based on the work needed. HVAC systems are complicated and may need several types of maintenance. Costs for common jobs are as follows:

Ways to Save Money on HVAC Costs

It's important to repair or replace your HVAC system when it's broken, but it can also be expensive. Thankfully, there are steps you can take to slow the wear and tear on your system.

• Keep your system clean. Cleaning your indoor evaporator coil, condenser fan blades, ductwork, and grills regularly helps your HVAC system work efficiently and lowers the risk of mold growth. The National Air Duct Cleaners Association recommends cleaning your HVAC system when it begins to look dirty.
• Monitor for potential problems. Monitor your system for issues, for example by routinely checking your thermostat and energy bills. This enables you to address problems before they get too expensive.
• Change filters regularly. Switching out or cleaning your air filters every 1–3 months helps air flow smoothly through your HVAC system. We also recommend regularly clearing dirt and debris away from the external parts of your system.
• Change the position of your blinds seasonally. Opening your blinds in winter allows passive solar heat into your house. Closing your blinds in summer blocks some heat from getting indoors. Both of these measures help decrease the work required from your house's HVAC system.

How To Choose a Local HVAC Company

Knowing the indicators of a good HVAC company is important. Working with a contractor that's properly licensed and highly experienced will give you confidence that they can maintain your HVAC system properly, providing you with effective air conditioning and heating in your home.

Compare Multiple Bids

Request estimates from three or more HVAC contractors. Describe your issues and ask if technicians can inspect your system in person. Review each provider's diagnoses, recommended solutions, estimated cost, warranties, and timeline. Avoid providers that pressure you or demand payment before work.

Check Credentials

It's important to choose an HVAC company that employs technicians with the proper qualifications and expertise. HVAC contractors in all states have federal requirements from the Environmental Protection Agency (EPA). To obtain the EPA Section 608 Technician Certification, contractors must pass an exam (the specific exam depends on the kind of equipment they intend to work with). Section 608 certification is required for all technicians who "maintain, service, repair or dispose of equipment that could release refrigerants into the atmosphere." All other licensing requirements are handled on a state-by-state basis.

HVAC contractors in Arizona may possess one of multiple types of specialty residential or dual contractor licenses from the Arizona Registrar of Contractors, depending on which part of the HVAC system they work on. Generally, four years of hands-on experience is required to apply for a license, and contractors must also be bonded. Always check a company's reviews and complaints with organizations such as Google Reviews, the Better Business Bureau (BBB), and Yelp. Choose a company with glowing reviews and stories of positive service experiences.

Understand Work Details

It’s important to understand what the work process is going to look like. For HVAC repairs, the company should detail the exact parts that need replacement and why. Confirm that your technician will clean and test the full system afterward to guarantee everything is working correctly. When replacing your HVAC, ask the contractor to provide details on the new model, estimated installation time, brand, features, and energy efficiency. Before work begins, make sure you understand how your provider will properly size the new unit for your home and what the cost will be.

Compare Warranties

A reputable HVAC company will back its repair services and installations with a warranty. The longer and more comprehensive the warranty coverage, the better. Carefully review warranty terms for each contractor and choose the provider that offers the greatest protection at a reasonable price.

Get Quote in Writing

Always get HVAC bids in writing before work begins. A thorough quote covers costs for both materials and labor. Make sure that you agree to all terms before signing the contract.