As homeowners Greg and Jennifer Quimby of Maine found out after winning the Scariest Utility Bill in America contest, sponsored by JELD-WEN Windows & Doors, there are a number of steps you can take to save energy on heating and cooling bills.
Watch this video to find out how to reduce your utility bills by:
- Conducting an energy audit on your home.
- Replacing single pane windows with insulated glass windows.
- Replacing or weather stripping old, leaky exterior doors.
- Insulating the basement ceiling.
- Installing insulating seals on electrical outlets and switches.
- Covering hot water pipes with foam insulation.
Danny Lipford: This week Today’s Homeowner is on the road in Winthrop, Maine, to help a young family tackle the scariest thing, in their hundred year old house, their utility bill. We’ve got tons of tips large and small to make a home more comfortable and efficient so stick around.
High utility bills are a big concern for homeowners everywhere, and making homes more energy efficient is a top priority for a lot of folks. Now this house is in Winthrop, Maine, and you can just imagine how harsh the winters are here. And keeping a home like this nice and comfortable can be quite a challenge.
Well, the owners of this home, Greg and Jennifer Quimby, entered a contest a few months ago called the Scariest Utility Bill in America sponsored by JELD-WEN Windows and Doors. Now JELD-WEN received entries from all over the country from houses that are small, large, warm climates, cold climates, and the Quimby’s won.
Their prize? They’re getting installed brand new energy efficient windows and doors and that should certainly help on that utility bill, and you can imagine having a family living in a house that’s over 100 years old and those out of control utility bills, that was some welcome news.
Jennifer Quimby: I was sitting, you know, on the computer online at night, and I saw the contest on the JELD-WEN windows website. And it asked for, it was called the Scariest Utility Bill, and I decided, well, I’ll enter this. You know our bills were really bad and I thought might as well take a chance.
Greg Quimby: And, yeah, you told me about it after the fact.
Jennifer Quimby: I told him about it after I entered us. I said by the way I entered this contest, and so when they called months later and that we won, I just was amazed. I was shocked. We were just really excited. I think it’s just bringing us to where we should be with the house.
When we first moved here we made the huge mistake of focusing on cosmetic, and then once we got the utility bill, I realized that we needed to start focusing on something else, on making the house more energy efficient.
Greg Quimby: Our utility bills have been very high. We’ve been doing everything we can to bring them down. For the heating we really needed something to bring down the heating bill. One month we hit over $1400 dollars in heating.
Jennifer Quimby: Because our doors were drafty, our windows were drafty, you know, cold air is coming right through. And you can feel that when you’re sitting down on the couch watching TV, you can actually feel the cold air coming in. So all the energy that we were you know spending is just going out the window.
Danny Lipford: A few months ago I had a chance to visit with the Quimbys to see just how harsh the winters are here. And, boy, with all the snow and ice we had everywhere, it was pretty impressive. I have to admire anyone that can endure winters like they have to endure. It also made me realize what a difference the new energy efficient windows and doors will make to their utility bill and their overall comfort.
Well we’re back now, and the windows and doors are about to go in. But, also, we’re going to look around the rest of the house, and identify some of the problems that they have in their house that they can correct very easily and make it more energy efficient.
Now, if you live in a cold climate like this, you can certainly benefit by doing a few of these tips around the house. It will make a difference in your utility bill. But no matter where you live in the country, these are things that will really save you money. Now, in order to identify the problems on this house we brought in an infrared specialist to do a little investigating.
Allen Lyle: This is John Cannamela, he uses infrared technology to basically perform an energy audit of the house. So John, tell me how this works.
John Cannamela: Well, infrared is a certain wavelength, and the wavelength we’re looking at is only the transfer of heat waves in infrared, which is part of a spectrum. The infrared camera that you see here only sees heat or lack of it. In this case we’re looking at a wall that has some insulation problems.
Allen Lyle: So you tell me all the blue that I’m seeing?
John Cannamela: So all the blue you’re seeing right there is, are closer to the outside temperature because my R-value in those areas are really low, and there may be a little or zero insulation in those zones. And the issue that comes across is that those are small areas but they add up.
Allen Lyle: Right. Now, let’s pan over here to the window then, because that’s where we really – single pane glass – so we’re getting a lot of blue.
John Cannamela: Right. The glass itself is hard to get a real accurate read, because of the nature of the material. But around the areas where the glass meets, or where the wood meets the glass, where the windows open and close, there’s virtually no insulation value whatsoever, it’s off my scale, it’s completely black. And that is one of the reasons the older homes are energy hogs, is because the windows lose lots of energy all around the edges.
Allen Lyle: From what I’m seeing, then, we’re on the right track to help solve the problem at this house.
Danny Lipford: We’re well on our way to making this house a lot more energy efficient. Well, here’s another energy saving tip from our buddy Joe Truini who lives just down the road in Connecticut on this week’s Simple Solution.
Joe Truini: Fold-down attic staircases, like the one I’m standing on here, are really convenient because they allow easy access into the attic. But they are also great energy wasters. That’s because the floor of the attic is always insulated really well. But when you close the attic, all you have is a quarter-inch plywood panel preventing air from coming up into the attic.
So to solve that problem, I built a box out of three-quarter-inch insulation board, this is polystyrene insulation board. Now, what you need to do first is get up into the attic and have someone close the staircase. Then measure all around the staircase and the height of the staircase. Then just cut the styrene with a razor knife to fit.
Now, to hold the pieces of styrene together what I used is metallic duct tape, not regular cloth duct tape, but the metallic duct tape works great. Then just tape it right down to the deck. Now, you can buy ready made units that go over the attic but they cost about 200 bucks. Now this one, for less than $20, works just as well.
Danny Lipford: This week we’re in Winthrop, Maine, and the owners of this house are the winners of the Scariest Utility Bill contest. Now I’ve seen some real scary utility bills but these folks were paying over $1,200 a month to keep this house that was built back in the 1890s, nice and comfortable on the inside.
Well, when you have an older home, especially one with very drafty windows and doors, one of the best things you can do to make it more energy efficient is to replace those doors and windows. And that’s exactly what we’re doing right now.
First the old storm windows have to come out, then Norm removes the interior window stops from the old wooden windows, so that each sash can be taken out. He leaves the outer most stop in place, and covers it with a bead of caulk before setting the new custom vinyl window into the opening.
When it’s level and plumb, screws are driven through the sides of the new window to secure it into the jambs before the perimeter is insulated. Then the interior stops are replaced and sealed with caulk, so the new window is airtight.
Now, these guys work for the local JELD-WEN distributor, but in many cases your local home center will also sell and install replacement windows. For example, if you ordered your windows from The Home Depot, Home Depot Home Services could deliver them, install them, and dispose of your old windows. But what do you look for in a replacement window?
Les Stephens: Always select a window that is dual-paned and not just dual-paned but make sure it has low-E glass and Argon gas filling. Low-E is a reflective coating that reflects heat back to its source, there’s two layers of silver that are microscopically thin. And when the heat sees that silver, it reflects back away from the window.
So in the summertime the heat from the sun hits that coating, reflects back and helps keep your home cooler. In the winter the heat that you’re producing inside your house hits that reflective barrier and comes back into the home, helping make your home feel more comfortable and warmer.
Argon gas is a light material that has a lower molecular density than air. And the way that energy is transferred is by molecules bumping into each other and transferring energy one from the other. So by replacing the air in between the two panes of glass with Argon gas, we reduce the amount of that conductivity and it makes the window more energy efficient.
Danny Lipford: So they’re efficient but how are the owners holding up in this process?
Jennifer Quimby: It’s been fun. Its actually been fun.
Allen Lyle: Well, what do you think?
Jennifer Quimby: I’m actually really surprised, I was expecting more of just getting an energy efficient makeover, you know, our oil bills were too high. My husband and I were shocked to see that the new windows look so much better than the old windows.
Allen Lyle: Yeah, it sounds though when you say that like you think energy efficient means ugly.
Jennifer Quimby: No, I just think that we were focused more on replacing them for energy savings but the difference is just amazing. I mean we thought a little concern about replacing the old windows and maybe losing some of the architectural details of having an old home, but actually I think it makes it look a lot better, it matches.
Allen Lyle: It really enhances the inside. The color is different, too, right?
Jennifer Quimby: Yeah, it used to be black, I actually think the white matches better. Plus, they let us pick out the same gridwork as what the original windows had.
Allen Lyle: Right the two over two. That was actually odd I had never seen that before. Even the style though, with the double hung, it really matches, really the historic value of the house. It looks great.
Jennifer Quimby: It does it looks a lot better.
Danny Lipford: Norm and Charlie have completed all of the replacement windows here in the back of the house and you know, not only are the homeowners going to save a little money on that utility bill, they are also going to save on their maintenance chores because, you know a house like this requires a lot of maintenance, but at least they won’t have to paint any of the windows. Just a little bit of washing from time to time on the vinyl windows, all they need in order to maintain them.
Now if you didn’t win a window and door contest you might be faced with the fair investment in replacing all of your doors and windows on your house but there are some other things that you can do, very simple inexpensive things that can have a big impact on your utility bill, and we’ll look at a few of those next, right after our Best New Product of the week.
Emilie Barta: Sometimes when a home needs to be updated, it’s about more than just changing the surfaces that you can see. Behind the scenes heating, cooling, and electrical systems have changed over the years as new more efficient methods were invented. And now the same is true for water heaters.
This is a tankless water heater from Paloma, and it’s different from the traditional tank style unit in several ways. Now first of all, it heats the water quickly as soon as it’s needed, instead of storing it in a tank. This means that you’ll never run out of hot water since it’s heated on demand.
Second, these devices are powered by natural gas or propane and they can be located either inside or outside your home. In either case, there’s this remote control here so that you can monitor and control temperature settings from anywhere in your house.
Finally and most importantly because you’re not keeping gallons of water heated every hour of every day a tankless unit uses much less energy. In fact it’s about 98% efficient. Now, you’ll have to pay more for these units up front, but you can get that money back quickly with savings of as much as 20% on your water heating bill. So if you want to save energy and money, the Paloma tankless water heater is for you.
Danny Lipford: Hey, we’re in the small town of Winthrop, Maine, and this is the winner’s house of the Scariest Utility Bill contest. Now for winning the contest the prize is having brand new energy efficient windows and doors installed all the way around the house. Now owner Greg Quimby wanted to do a little something extra to try to drive this very high utility bill down a little bit and let’s catch up with him down in the basement.
Most everyone knows adding insulation to your house will increase its energy efficiency but most people think of adding that insulation to the attic not under the house. Greg, are you ready to tackle this one?
Greg Quimby: I think so. I brought everything you said to get – the tape measure, the razor knives. I also picked up the work gloves, the respirator and the safety glasses. But I’m wondering why no staple gun?
Danny Lipford: Well, a lot of people think about a staple gun when they’re installing insulation, and you need it when you’re putting in walls and other applications. But when you’re dealing with insulation overhead like this, this is what you want.
This is an insulation support wire. And basically it’s just a fairly stiff wire that you force between the joists, and it will hold all the insulation in place, not a staple needed at all. Hey, you’ll also be glad I brought along a little bit of this.
Greg Quimby: Baby powder?
Danny Lipford: Baby powder. What this will allow us to do is put a little of it on any of our bare skin, anything that is not covered by the gloves and our long sleeve shirts. And it’ll keep the insulation from irritating, the fiberglass can irritate a lot of people and so it’ll make it a little more pleasant and plus it kind of smells sort of good.
Once we’re set up with our safety gear we’re ready to roll out the insulation. You’ll want to measure the length of the cavity you’re filling and cut the insulation to fit it snuggly. But here we’re also measuring the width because the floor joists in this old home are not spaced consistently so we’re using insulation designed for 24-inch spacing and cutting it down to fit each individual space.
Because of the random joist spacing, we also have to cut down our wire hangers so that they fit properly. Now the craft paper backing on this insulation acts as a vapor barrier so you’ll want to make sure that you face it up towards the living area of the home so that it doesn’t trap moisture in the floor cavity. People often get this backwards in basements, because they prefer to leave the craft paper showing.
Now, while we’re down here, we’re also adding some pipe insulation to the hot water lines coming from Greg’s water heater and boiler. Now, even these small improvements can make a big difference and Allen’s getting some help on one upstairs from Greg’s two sons Tom and Jordan.
Allen Lyle: OK. So you remember that funny picture I showed you? It had a lot of funny color on it? It was this plug right here and it was blue just a little spot of blue. You know what that meant?
Tom Quimby: The cold air coming into the house.
Allen Lyle: Cold air! That’s right. Cold air was coming in. That’s a bad thing especially in the winter. Now just for this little spot you wouldn’t think that’s too much but if you start counting all of the ones that you have around your house on the outside, that’s a lot and when you put them all together you could have a hole this big in your house in the middle of winter.
Oh, we didn’t quite get it out. So what we’re going to do with those little pieces that you’re pulling out for me, did you get yours Jordan? All right. We are going to block it with this gasket. We’ve got to get that little metal thing out, remember this? Got to push that through, alright.
Here’s how simple it is. Put that gasket over the plug, put the plate over, and you are done! Now, the two of you have to make me a promise. I don’t want to see yall playing with these electrical plugs ever OK? But you’re going to have to help me. We have to do that to all of the outside plugs and switches in the house. Are you ready?
Tom Quimby: Yes!
Danny Lipford: While Allen’s crew is doing that, I’m going to address a worn threshold on one of the doors that isn’t being replaced. This gasket is in such bad shape that it wasn’t doing a thing to seal the doorway. These old style thresholds can really be a pain to replace because you have to cut the metal to fit the opening, but it really can make a difference when we have the kind of cold weather they do here. This new threshold should stop that constant draft of cold air that was leaking under the door.
Now, if you live in a warmer climate and replacing all of your windows isn’t in the budget, you might consider adding window film to the ones you already have. This stuff is applied over the inside of the existing glass and blocks up to 60 percent of the sun’s heat from entering your home. That means your home is more comfortable and your air conditioner doesn’t have to work as hard, which in turn lowers those utility bills.
Well, Allen, I see you’re still playing with your little infrared camera here.
Allen Lyle: I love this thing and it really, OK, you might say I’m playing with it, but really it’s because I’m skeptical. That might be a bad thing. But seriously when you’re doing this type of work, you tend to ask yourself does it really make a difference?
Danny Lipford: Yeah, now I know you guys, you and the kids were working on these outlet covers and everything. And you know a lot of people will ask me does that really make a difference, because it is a very simple thing. And you know you go around the outside of your house, it’s bound to help some but is that showing you the results.
Allen Lyle: It does, now let me show you the before picture. Right here.
Danny Lipford: OK. So I see the flaring around all the blue. Right.
Allen Lyle: Now, let me take it off of that. And when you get it back on here you can see it’s actually holding the heat in. Isn’t that cool?
Danny Lipford: How about that?
Allen Lyle: Isn’t that cool?
Danny Lipford: Yeah, it is pretty cool, and what 25 cents a cover?
Allen Lyle: The least expensive improvement we made and what a difference.
Danny Lipford: Yeah, that’s great. Good idea.
Allen Lyle: All right, now I’m actually going to go around the rest of the house, and check that out, so why don’t you check out this week’s Ask Danny.
Terry: What’s a simple inexpensive way to cut down on my air conditioning costs?
Danny Lipford: Homeowners are always looking for easy economical ways to reduce their monthly heating and cooling cost. Now, if your home really heats up in the summertime, the solution may be as simple as a little shade. Installing a tinted film on your windows can block a significant amount of the suns heat while also protecting your furnishings from all that fading that can occur.
Now, pay particular attention to any window that you may have that is not covered with draperies or shades. Installing awnings over them will block the suns rays, and this can reduce a room’s temperature by up to 15 degrees, saving you 25% on your air conditioning needs for that particular room. Now, if you’re not real crazy about the look of an awning, you might consider strategically planting a shade tree to get similar results.
This week we’ve shown you some energy efficiency improvements to Greg and Jennifer Quimby’s home in Maine. We’ve made changes large and small to help them bring their utility bills under control. Something that’s very important during those long cold winters here.
The whole family has gotten involved in this process to make a difference in the bottom line of that utility bill. Plus, we’ve managed to make it more comfortable and preserve the historic character and charm of this home.
The house is a lot more attractive and we know its a lot more energy efficient, we have made a lot of friends here in Maine this week. You know I can’t wait to hear from the Quimbys in the months ahead on how much they’re able to save every month on their utility bill.
And you know involving kids in energy saving efforts like this, it’s really important. It makes them aware of how easy it is to make a home more energy efficient and they’re helping to control the family budget. Now, we have more energy saving tips on our website at dannylipford.com. Hey, thanks for being with us, we’ll see you next week.
One sure way to change your room is to change the ceiling. Next week we’ll show what a difference it can make.
If you would like to purchase a DVD copy of this week’s show, visit our website at dannylipford.com, or call us at 1-800-946-4420.
I found this Video very informative. I have not ever seen insulation put with the vapor barrio r up in the floor joyce like that before. And I also did not realize that the outlet gaskets did that much to the save heat in your home. I have not put them in my home yet but will be doing that today. If I can get them from our local Hardware store. Thank you for doing this Video. Steve.
I have a 2440 sq.ft modular 1 story home and put in a new heat pump just 2 years ago and still my electric bills are over 300 dollars a moth in the winter .I would love to change out my hot water heater to an on demand but installers here are just not around this area .The floors are insulated and I added more insulation to the attic.The house is 2×8 construction and I live near the NC border in Virginia .Where can I find an installer in Pittsylvania county VA for the water heater .We are seniors and trying to save any place I can .My hubby has heart problems and I keep it warm in the winter so he does not get sick .
The video was great with many ideas to insulate areas around the home that many DIYers can do themselves (I for one) but I didn’t hear an update on the Quimby’s monthly heating costs after all of this work was done. I think that would’ve been important to the viewers in justifying all of these improvements. Or did I just miss this information in the video?