Updated On

October 17, 2023

Why You Can Trust Us

Today’s Homeowner exists to help you maintain or improve your home safely and effectively. We uphold strict editorial standards and carefully vet the advice and resources referenced in our articles. Click below to learn more about our review process and how we earn money.

Learn More

    Even if you love animals, it’s frustrating when greedy squirrels and raccoons empty bird feeders in a few short hours. The common bowl-shaped baffles are pretty good at keeping squirrels out, but raccoons have no trouble climbing right over them. If you do not want to go the DIY path, take a look at some of the top-rated squirrel baffles and the best squirrel-proof feeders.

    If squirrels or raccoons are eating you out of house and home, here’s a simple solution. This DIY raccoon and squirrel baffle is easy to make, inexpensive, and is sure to befuddle even the craftiest of critters.

    What You’ll Need

    I love this project, because not only does it solve a really big problem, but you can buy the parts needed at most any home improvement center. To make this baffle, you will need:

    Materials Needed

    • Stovepipe: One section of 6” diameter by 24” long stovepipe. Stovepipe comes in black, but you can also buy galvanized duct pipe and paint it yourself.
    • Stovepipe End Cap: One 6” diameter end cap that fits on stovepipe.
    • Sheet Metal Screws: 3 to 4 sheet metal screws, 1/2″ long or shorter.
    • Hose Clamp: One hose clamp, small enough to fit snugly around your bird feeder pole.

    Tools Needed

    • Screwdriver
    • Drill
    • Vise, clamp, or pliers
    • Large Drill Bit or Hole Saw: A metal cutting drill bit or hole saw the diameter (or slightly larger) of the feeder pole.
    • Small Drill Bit: A metal cutting drill bit slightly smaller than the sheet metal screws to drill pilot holes.

    How To Build The Baffle

    Making the baffle is pretty straightforward, with drilling or cutting a smooth hole in the end cap being the only operation that takes a bit of care to get right.


      Baffle with hole cut in cap.

    Step 1: Drill Hole

    Clamp the end cap firmly in a vise, or hold it with pliers. Don’t hold it with your hands as the drill bit can easily slip and cut you. Using the drill bit or hole saw, carefully drill a hole in the center of the end cap (see How to Find the Center of a Circle).

    Today’s Homeowner Tips

    If your pole is square, you may want to opt for drilling a small pilot hole, then using a saber saw or metal shears to cut the required shape.

    Step 2: Fit End Cap

    Hook the stovepipe together, and fit it snugly inside the end cap.

    Step 3: Drill Pilot Holes

    Lay the baffle carefully on its side, and drill pilot holes through the sides of the end cap, making sure the holes goes through both end cap and stovepipe.


        Hose Clamp on feeder pole.

    Step 4: Attach Screws

    Tighten the sheet metal screws to hold the end cap and stovepipe together.

    Step 5: Slip Baffle Over Pole

    With the baffle pointed down like a bell, slip the feeder pole through the hole in the center. The top of the baffle should be about 4’ to 5’ off the ground. Mark the pole at the top of the baffle, and raise the baffle out of the way.

    Step 6: Attach Hose Clamp

    Using the screwdriver, attach the hose clamp to the feeder pole at your mark.

    Step 7: Install Baffle

    Slip the baffle back down so that it rests on the hose clamp, and you’re done!


    Finished squirrel and raccoon baffle installed on bird feeder pole.

    Get Free Pest Control Estimates
    Connect with local pest control professionals near you.

    Enjoy Feeding the Birds!

    This baffle really works – the feeders featured in the photos have been consistently raid-free since installing it. The first days provided some enjoyment as squirrels and raccoons made determined attempts to get climb over the baffle. The squirrels repeatedly crawled up inside it and got stuck, and the raccoons simply couldn’t reach around it.

    By the end of the first week, the baffle had some scratches, where it appears that a squirrel tried a mad leap and ended up sliding down the outside of the baffle. I wish I had seen that – who said foiling the critters can’t be fun?

    Editorial Contributors
    avatar for Danny Lipford

    Danny Lipford

    Founder

    Danny Lipford is a home improvement expert and television personality who started his remodeling business, Lipford Construction, at the age of 21 in Mobile, Alabama. He gained national recognition as the host of the nationally syndicated television show, Today's Homeowner with Danny Lipford, which started as a small cable show in Mobile. Danny's expertise in home improvement has also led him to be a contributor to popular magazines and websites and the go-to source for advice on everything related to the home. He has made over 200 national television appearances and served as the home improvement expert for CBS's The Early Show and The Weather Channel for over a decade. Danny is also the founder of 3 Echoes Content Studio, TodaysHomeowner.com, and Checking In With Chelsea, a décor and lifestyle blog.

    Learn More

    photo of Lora Novak

    Lora Novak

    Senior Editor

    Lora Novak meticulously proofreads and edits all commercial content for Today’s Homeowner to guarantee that it contains the most up-to-date information. Lora brings over 12 years of writing, editing, and digital marketing expertise. She’s worked on thousands of articles related to heating, air conditioning, ventilation, roofing, plumbing, lawn/garden, pest control, insurance, and other general homeownership topics.

    Learn More