Even if your attic is well insulated, the folding stairs that provide access can be a significant source of heat loss. They are often poorly sealed and provide only a thin piece of plywood to keep the heated air from escaping. Sealing and insulating attic drop-down access stairs can help increase comfort and reduce utility costs. If you’re new to attic spaces, take a few minutes to familiarize yourself with the basics of attics.



    Sealing the Attic Stair Opening

    Begin by checking to see if the attic stairs close tightly, then apply self-adhesive foam weather stripping around the perimeter where the plywood door meets the frame, except on the hinge end. The foam weatherstripping creates a tight seal between the attic door and the frame to prevent air leaks. Stopping air leaks is essential because it helps lower energy bills and keeps heated or cooled air inside the home.


    Building an Insulating Foam Box

    Once you’ve sealed the opening, you can further insulate it by building a foam box in the attic to enclose the stairs. The box is constructed from rigid foam insulation boards and sealed with foil tape to create an airtight enclosure. Doing this prevents conditioned air from escaping into the attic.

    Materials for the project cost around $30. You will need a 3/4” x 4’ x 8’ sheet of rigid foam board, a 2” x 30’ roll of foil duct tape, two 3/4” x 17’ rolls of foam tape weather stripping, and a tube of caulking (optional). Be sure to use foil tape, as regular duct tape won’t hold up to the heat in the attic. The foil tape creates an airtight seal on the insulating foam box.


    Measuring and Cutting the Foam Board

    Start by measuring the dimensions of the opening. Accurate measurements ensure the insulating box will fit properly over the attic stairs and secure a tight fit.

    Measure the height of the stairs that protrude above the attic floor. Knowing the exact height allows you to cut the foam board strips to the correct size.

    Using a sharp utility knife and straightedge, cut strips from the rigid foam board to form the sides of the box. Make the strips 1–2 inches wider than the stairs and extend above the floor to allow space for tape and sealant. For clean cuts, use a new blade. Precise cuts make it easier to assemble the box.

    Finish the cuts by bending the foam and cutting from the other side. The two-sided cut helps ensure straight edges. Straight edges allow for tight seams when taping the box together.

    Cut the strips to the proper length using the framing square. Then, join the corners with foil tape to form the box shape. Run a bead of caulking along the joints for an extra-tight seal. The caulking and tape prevent air leaks.


    Installing the Insulating Box

    Attach foam weatherstripping tape to the top edge of the box to form a tight seal against the attic floor. The weatherstripping helps block conditioned air from escaping around the box.

    Cut a piece of rigid foam board the size of the exterior box dimensions for the lid. Tape the cover to the top edge of the box along one side with foil tape, allowing the lid to hinge open for attic access. You’ll want to tape three sides and leave one side free to open the lid.

    Sweep the attic floor around the opening so the foil tape adheres properly. Position the box over the stairs opening, checking it is square. Getting the box positioned squarely allows it to seal tightly.

    Run strips of foil tape around the box’s edges to seal it to the attic floor. Apply caulk along the tape for maximum air sealing. The tape and caulk form an airtight connection.

    Caulking around the inside attic stair framing provides an extra layer of air sealing. Take time to caulk gaps in the frame for the best insulation results. Remember to close the insulating box lid when you leave the attic. Doing this preserves the box’s insulating value and prevents conditioned air from escaping.


    Purchasing a Premade Attic Stair Cover

    For those who would prefer to purchase a premade cover, the Attic Tent is available in several sizes to fit different openings. You can install these premade covers in minutes to provide a similar insulating value to a DIY box.

    Today’s Homeowner Tips

    Purchasing a cover costs more but saves the time and effort of building your insulating box. Consider your budget, skill level, and time constraints when constructing a DIY foam box or buying a prefabricated cover.


    So, Is Insulating Attic Stairs Worth It?

    Attic stairs can be a significant source of energy loss if left uninsulated. The heat from your home escapes through gaps around the door and the thin attic stair material. Adding insulation helps prevent conditioned air from being lost to the attic.

    The project takes 1–2 hours to complete. The materials cost around $30 for a DIY insulating box. Purchased covers range from $150–$300, but install in minutes. Given the simple process and low cost, insulating your attic stairs is a worthwhile efficiency upgrade for most homes. Reducing air leaks helps lower energy bills and increase comfort.

    Proper attic insulation is about finding weak points that allow heat transfer and sealing them. Ensure you hang your attic stairs correctly for new attic stairs installation projects. Next, take the time to insulate this spot, and you’ll quickly notice the benefits through a more comfortable, energy-efficient home. The attic is an essential space in your home. If the rest of your attic is uninsulated, you’ll need to insulate the floor of your finished attic as well. 


    FAQs About Insulating Attic Stairs

    What are the main benefits of insulating attic stairs?

    The primary benefits are reduced heat loss, lower energy bills, and increased comfort in the rooms below the attic. The prevention of leaks maintains heated or cooled air within the primary living areas.


    Should I use faced or unfaced insulation?

    Use unfaced insulation boards for attic stair boxes. The bare foam board seals better against the attic framing. Faced boards are more prone to gaps, which reduces effectiveness.


    How long does it take to build a DIY insulating box?

    With the suitable materials assembled ahead of time, the project typically takes 1–2 hours for most DIYers to complete. The steps include building the box, taping the seams, sealing it to the attic floor, and weatherstripping along the frame.


    What kind of tape should I use?

    Foil tape designed for HVAC systems provides the best seal on DIY insulating boxes. Regular duct tape does not withstand attic heat and can fail over time.


    Should I seal the inside of the attic door frame, too?

    Yes, applying caulk around the inside of the frame provides an additional layer of air sealing. The caulk fills small cracks and gaps in the wood framing that can contribute to air leakage.


    How often do I need to check the box?

    Periodically check that the box has not shifted or come loose. Refasten any loose tape to maintain the tight seal. Also, check that the lid stays closed to prevent conditioned air from escaping into the attic.


    Editorial Contributors
    avatar for Elisabeth Beauchamp

    Elisabeth Beauchamp

    Senior Staff Writer

    Elisabeth Beauchamp is a content producer for Today’s Homeowner’s Lawn and Windows categories. She graduated from the University of North Carolina at Chapel Hill with degrees in Journalism and Linguistics. When Elisabeth isn’t writing about flowers, foliage, and fertilizer, she’s researching landscaping trends and current events in the agricultural space. Elisabeth aims to educate and equip readers with the tools they need to create a home they love.

    Learn More

    photo of Andrew Foligno

    Andrew Foligno

    Andrew Foligno is an editor for Today’s Homeowner, with over 6 years of experience working in digital marketing. He started his career as a content writer at an agency, covering industries such as HVAC, plumbing, painting, lawn care, and more. Soon, he was promoted to an editor position where he oversaw a team of writers before moving on to other facets of digital marketing. When he isn’t working, Andrew enjoys going to the gym to be active, as well as going to the movies to unwind.

    Learn More