To soak up oil spills, pour kitty litter on the oil, and then use a brick to grind the kitty litter up to make it more absorbent. Leave the kitty litter on the oil for 20 minutes or longer before sweeping it up. Watch this video to find out more.
- How to Remove Rust Stains from Concrete Naturally (article)
- Problems with Efflorescence Stains on Retaining Walls (article)
- How to Apply an Epoxy Coating to a Garage Floor (video)
Joe Truini: It’s very common to have greasy oil stains on your driveway or garage floor, as we have here. And if you don’t clean it up right away, it’ll soak in and become a permanent stain. Now, it might be from a leaky oil pan; or, in this case, I recently changed the oil, and I just accidently spilt some on to the floor.
So we are going to clean it up using kitty litter. Use any old kitty litter. You can buy the most inexpensive type; it doesn’t have to be anything fancy. But you want to cover it, a nice thick layer just like that, a nice thick layer of kitty litter.
And then we’re going to use a brick—this is half a brick, but any size brick or even a chuck of two by four will work—and we’re going to pulverize the kitty litter. You want to grind it up until a fine powder, because the finer the powder is the more it will absorb the oil.
And that’s the whole point of kitty litter, right? It does a great job at absorbing liquids, including oil stains.
Now, ordinarily I would let that set for 15 or 20 minutes, or even overnight if it’s a really thick, deeply set stain. But we’re going to—I’ll show you how even just a few seconds, how well it does at absorbing that oil.
Now, from that puddle you can see you just have an outline of the stain. And, again, if I let that kitty litter set, that stain will be completely gone by morning.
Comments are closed.