Rocking chairs can scratch and wear the finish off hardwood floors over time. To prevent damage to wood floors by rocking chairs, apply strips of the loop side of peel-and-stick, hook and loop fasteners to the bottom of the rocking chair runners.
Watch this video to find out more.
- How to Repair a Scratch or Gouge in a Hardwood Floor
- How to Fix a Wobbly Chair Leg (video)
- Repair Loose Chair Rungs (video)
Joe Truini: The challenge of living with hardwood floor is that furniture has a tendency to scratch the floor and wear off the finish. This is particularly true of rocking chairs. The runners on the chairs not only scratch the floor, but as you can see here, it wears the wood and the finish right off the bottom of the rockers.
So I’m going to solve this problem with hook and loop fastener. I went and I bought a strip of fastener and cut it to length so it covers, not the entire runner, but most of it. But I’m just going to use the loop part, not the hook part, but the soft loop part.
This is peel-and-stick adhesive. I’m going to peel it off of there, and stick it right down the center of this runner. This is a three-quarter-inch wide strip. Here you go. I’m going to put another one on this side, of course.
This is extremely durable, you’d be surprised, and the adhesive is strong. It’s hard to pull it off once it’s on. About the same place, right in the center, press it down, and there you go, that’s all there is to it.
I’m going to turn this over. And now those strips will not only protect the runner on the bottom of the chair, but also protect the floor, and no more scratches.
Comments are closed.