After the wood forms for the Kuppersmith Project driveway had been constructed, it was time to pour the concrete. Spaces were built into the forms for pavers, which will be installed after the concrete has set and the forms removed.
When the concrete had been poured in each section, a screed board was pulled across the top of the form to level the wet concrete. Next, a bull float with a long handle was used to smooth the surface of the concrete. This was followed by further smoothing using a hand trowel.
Watch this video to find out more.
Further Information
- How to Pour a Concrete Driveway (video)
- Repair Cracks and Resurface a Concrete Driveway (video/article)
