Water damage to kitchen cabinets can occur from various sources, including leaks, spills, and high humidity. If left untreated, water damage leads to bubbling, peeling, discoloration, and warped or swollen wood. While preventing water damage is ideal, it is possible to repair water-damaged cabinets and restore them to like-new condition with some time and DIY techniques.


Assess the Damage

The first step is examining the cabinets to determine the extent of the damage. Look for visible signs of damage like bubbling or peeling veneer, soft spots in the wood, white residues from dried water, rust on metal hardware, and joint separation. 

Begin by opening cabinet doors and drawers to inspect all sides, including the interior and underside. Check areas near plumbing fixtures like sinks for evidence of leaks. Also, inspect areas prone to splashing, such as behind the faucet and beside the dishwasher.

If the damage covers a large area or you discover mold, rot, or structural damage, you may need to replace cabinets rather than attempt repairs. In this case, contact a kitchen remodeling contractor for an assessment.


Prepare for Repairs

Start by removing all items from the cabinets and protecting surfaces around the workspace to begin repairs. Then, turn off water supply lines to prevent leaks during the project.

Sand down any lifted edges or bubbled areas using 100 to 180 grit sandpaper until smooth and even with the surrounding cabinet, and wipe sanded areas with a dry cloth to remove dust.

Lastly, clean cabinet surfaces thoroughly using an all-purpose cleaner or diluted bleach solution. Let dry thoroughly to prevent paint or finish from adhering poorly.


Repair Products

The products needed for repairs depend on the type and extent of damage. 

Some standard repair products include:

  • Wood filler: Fills gouges, holes, and degraded areas in cabinet wood. Look for a filler that matches the color of your cabinets.
  • Wood epoxy: Two-part epoxy formulas designed for wood repair to fill gaps and rebuild damaged sections. Ideal for rotted, cracked, or water-logged spots.
  • Grain fillers: Fills open wood pores for a smooth finish before repainting.
  • Sandpaper: For sanding damaged areas and smoothing fillers and epoxy. Use 100 to 220 grit.
  • Paint or wood finish: Match the existing finish for best results. I recommend bringing a drawer or door when buying to help you identify the closest match. 
  • Rags or brushes: For applying epoxy, paint, stains, etc. 
  • Disposable gloves: For protecting skin from chemicals.
  • Clamps: Hold joints tight for glue or epoxy to set.

Repair Cabinet Surface Damage

You can use simple repair techniques for surface damage, like peeling veneer or laminate, light staining, and minor bubbling. 

First, use painter’s tape to mask off undamaged areas for a clean repair line. Next, sand the damaged areas to bare wood to prepare the surface. Wipe away any dust, apply a coat of wood filler according to package directions, and let it dry completely. 

Today’s Homeowner Tips

If needed, sand again to smooth the surface before cleaning it. Finally, finish the repair by sealing with two coats of clear polyurethane or repainting to match the existing cabinet color. 


Repair Joint Separation

Doors, drawers, or cabinets coming loose at the joints may indicate swollen wood and moisture damage. To repair, start by clamping the joints tightly together and using painter’s tape to protect undamaged areas. 

Next, inject wood epoxy formulated for repairs into the gaps using the applicator nozzle and remove any excess. Allow the wood epoxy to cure fully, around 24 to 48 hours, before removing clamps. 

Lightly sand the cured epoxy if needed to smooth the area, then wipe clean. Then, reinforce the joint with wood glue, clamping again until set. 

Finally, finish as needed with paint or a clear coat to match the existing cabinets. Following this process will re-secure joints that have come loose due to moisture issues.


Replace Damaged Parts

Replacing parts of the cabinetry may be necessary for more extensive water damage or rotted sections. 

First, remove hinges and hardware to detach the damaged cabinet door, drawer, or face frame. Take precise measurements, bring the damaged piece to a home improvement store, and have a new piece cut to size to match the original.

Once you have the replacement part, sand and finish it to match the existing cabinets. Reattach the new piece using wood glue and new hardware. Next, fill gaps with wood filler, let dry, and smooth sand for an even surface. Add finish coats to blend with the existing cabinets. 

Canva

Finally, reinstall the knobs and pulls once the finish is fully dry. 


Prevent Future Water Damage

To prevent water damage after repairs:

  • Seal areas around sinks and fixtures with silicone caulk.
  • Install backsplash wall protection behind sinks. Stainless steel or plastic wall panels are affordable and waterproof.
  • Use rug pads under appliances like the dishwasher to absorb moisture.
  • Keep cabinet doors and exterior surfaces dry after using the kitchen.
  • Install an under-cabinet LED lighting system to illuminate backsplashes for quick cleanups.
  • Consider water sensors that trigger audible alarms when they detect liquid. You can place them near plumbing connections to detect water leaks early on. 
  • Check under sinks regularly for signs of leaks like moisture or mineral deposits. 

So, Is Repairing Water-Damaged Cabinets Difficult?

Repairing minor to moderate water damage on cabinet surfaces, joints, and parts is doable for an experienced DIYer. The process involves simple techniques like sanding, filling damaged spots, clamping joints, and matching the existing paint or finish.

More extensive damage may require replacing entire cabinet boxes, doors, or drawers. At this point, the repair costs approach those of new cabinet installation. Consult a kitchen remodeling contractor to determine whether replacement or refacing is the most cost-effective.

While preventing water damage through caulking, backsplashes, monitoring leaks, and quick cleanup is ideal, almost any DIYer can restore mildly damaged cabinets to like-new condition. Following a careful process and enlisting help for structural repairs enables you to save thousands versus cabinet replacement.

Get Your Estimate From Kitchen Experts
Match with a kitchen to help you with your project.

Frequently Asked QuestionsFAQs About Repairing Water-Damaged Cabinets

What are signs my cabinets have water damage?

Look for bubbling or peeling veneer, soft spots in the wood, white mineral deposits, rust on hardware, separation at joints, and mold or mildew odors.


What’s the best way to match the existing paint or finish on my cabinets?

Bring a drawer front or door from your cabinets when buying finished products. Wood stains tinted to the existing cabinet color also help achieve an exact match.


Can I use wood putty on particle board or MDF cabinets?

Wood filler will not bond properly to these materials. I recommend using an epoxy repair adhesive instead.


What kind of paint should I use?

An oil-based alkyd enamel provides a durable finish on wooden cabinet surfaces. Use a primer designed for laminates on plastic-coated cabinets.


Why do my cabinets keep getting water damage?

Frequent water damage usually indicates an ongoing source, like a minor leak at a pipe connection. Improving kitchen caulking and adding backsplash protection can prevent many common causes of water damage.


Editorial Contributors
avatar for Elisabeth Beauchamp

Elisabeth Beauchamp

Senior Staff Writer

Elisabeth Beauchamp is a content producer for Today’s Homeowner’s Lawn and Windows categories. She graduated from the University of North Carolina at Chapel Hill with degrees in Journalism and Linguistics. When Elisabeth isn’t writing about flowers, foliage, and fertilizer, she’s researching landscaping trends and current events in the agricultural space. Elisabeth aims to educate and equip readers with the tools they need to create a home they love.

Learn More

photo of Amy DeYoung

Amy DeYoung

Contributor

Amy DeYoung has a passion for educating and motivating homeowners to improve their lives through home improvement projects and preventative measures. She is a content writer and editor specializing in pest control, moving, window, and lawn/gardening content for Today’s Homeowner. Amy utilizes her own experience within the pest control and real estate industry to educate readers. She studied business, communications, and writing at Arizona State University.

Learn More