Fewer people are buying new homes, but everyone wants to improve what they have. With money tight right now, how can remodeling be done more reasonably without the results looking cheap?
Read on for tips on how to make your remodeling project look great without breaking the budget.
1. Plan, Plan, Plan
Consider using in-house designers and decorators. Most home centers offer people that can help you design your kitchen, choose the right flooring, paint colors and more. This service will give you confidence in your selections without the added cost of hiring an independent decorator. Decide on the entire scope of work to be done before you start. Try to avoid moving electrical, plumbing, ductwork, or walls if possible to keep the cost down.
2. Give It a Try
Even if you’re not the handiest person on the block, you may still be able to do some of the work yourself to help make the project more reasonable. Maybe you can handle the tear out or removal of the wallpaper, plumbing fixtures, trim, etc. Or perhaps your can tell the contractor you will do all the clean-up or painting. Any help you provide can cut down on expensive labor costs.
3. Save, Reuse, Renew
If you decide to do the tear out yourself, take care not to damage useful items, since many of them can be used again. Light fixtures, trim, doors, hardware, and cabinets might be able to be used on the same project, in a different project at your home, or donated to a Habitat for Humanity Restore for a tax write off.
4. Looks Expensive, but It’s Not
There are many products now available that “mimic” the look of more expensive materials. Below are four examples, the cost differences and what you could save in a typical application.
- Granite: $79/sq. ft.
- Granite Plastic Laminate: $38/sq. ft.
- Savings: $41/sq. ft. x 30 sq. ft. (average kitchen) = $1,230
- Ceramic Tile: $4/sq. ft.
- Vinyl Tile: $1/sq. ft.
- Savings: $3/sq ft x 100 sq ft (10’ x 10’ floor) = $300
- Installed Wood Flooring: $9/sq. ft.
- DIY Laminate Flooring: $3/sq. ft.
- Savings: $6/sq. ft. x 200 sq. ft. room (10’ x 20’ room) = $1,200
- Solid Wood: $78/ea.
- Hardboard: $37/ea.
- Savings: $41 x 12 doors (average typical home) = $492
I hope this helps you improve your home without breaking the bank!